Shure Beta87 Condenser Vocal Microphone

The Shure Beta 87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production.

The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the “boomy” sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.

Features:

Smooth frequency response with gradual presence rise

Highly consistent supercardioid polar pattern provides superior gain-before-feedback

Electronic low-frequency roll-off compensates for proximity effect

Wide dynamic range (117 dB) and low distortion characteristics

Very low susceptibility to RFI and electromagnetic hum

Advanced cartridge shock-mount system absorbs mechanical shocks and reduces handling noise

Built-in pop filter reduces undesirable wind and breath sounds

Legendary Shure quality and reliability

Specifications:

Cartridge Type Condenser (electret bias)

Frequency Response 50 to 20,000 Hz

Polar Pattern Supercardioid

Output Impedance Rated at 150 ohms (100 ohms actual +/- 20%)

Recommended minimum load impedance: 800 ohms

Sensitivity (at 1,000 Hz)

Open Circuit Voltage -52.5 dBV/Pa (2 mV) (1 Pa = 94 dB SPL)

Clipping Level (at 1,000 Hz) 1000 ohm Load: -6 dBV (0.5 V)

Maximum SPL (at 1,000 Hz) 140.5 dB (0.25% THD, 1000 ohm load)

Self-Noise (equivalent sound pressure level; measured with true rms voltmeter) 23.5 dB typical, A- weighted 25.5 dB typical, weighted per DIN 45 405

Dynamic Range 117 dB (maximum SPL to A-weighted noise level)

Signal-to-Noise Ratio 70.5 dB at 94 dB SPL (IEC 651) (S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.)

Polarity - Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3

Power - Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain: 1.0 to 1.2 mA

Connector - Three-pin (XLR) professional audio

Case - Aluminum construction with blue metallic finish, and hardened steel grille with nickel satin chrome plating

1.We accept Paypal or Bank Transfer, Other (cash is mailling by registered letter OR western union money transfer service.......)

2.I will send the item to buyer as soon as I receive the payment.
3.If buyer is not satisfied with our item, please contact us before leaving negative feedback. Leaving negative feedbacks without notice does not help to solve the problem. We will be working hard to resolve any problems.
4.Shipping and handling: By EMS( traceable)takes 3-10 days to reach any cities of Worldwide.
5.If the item arrives damaged during the shipping or has obvious defects, Please notifies seller within one days of receipt.The item must be returned to us in 14 days with same condition as you received.no exceptions. we will refund full purchase price as soon as it is verified. 
6.If buyer does not agree with the shipping and handling fee payment policy above, Please do not bid, thanks!
If you have any questions, please contact us on:(bestwu168@126.com)